Alla Lighting T10/T15 912 921 W16W LED Reverse Light Bulb, CAN-BUS Error Free 6000K White Back-Up/Trunk/3rd Brake Lights Lamp 922 906 921KX 912K 921LL Upgrade

Installed in maybe 5 min and they're pretty bright.I can't speak to longevity but they're at least 4x brighter and 6000k, which is much better than the 3000k OEM

Plug and play in my 2018 Tacoma. Instructions for removing the tail light assembly can be easily found online. Note that you do not have to disconnect the assembly itself; it will remain attached via cables. Disconnect the rear bulb connector then rotate the light bulb assembly out of its socket. Only the halogen bulb itself needs to be removed. The mounting assembly will remain as is and these lights plug right in. As far as I can tell, polarity (which way you plug it in) does not matter. Recommend you disconnect the negative terminal from your battery while doing any electrical work, even something as simple as swapping some bulbs. Reverse the steps to put everything back together.These lights add much need illumination while in reverse and, since they project white light, make things even easier to see. The difference is night and day (pun intended) between these lights and the stock halogens. This is an affordable mod to any vehicle to get a safer picture while in reverse. If you have a backup camera, the benefits are even more noticeable.

You'll have a good time putting these in blindly into a 2009 RAV4... You won't see what you're doing, but you can feel your way. The passenger side will be a little more fun since the factory jack is a bit in the way. They go in perfectly, the output is WAY stronger than factory and adds a huge amount more visibility when reversing. Hope they last!

I used these to replace my reverse lights and cargo lights in my Silverado. The swap out is easy and can be done by anyone who has 15 minutes and a torx bit screwdriver. They look great. They are much brighter and crisper than the factory bulbs. I’d like to give 4.5 stars with my only concern being they don’t fit quite as snugly as the factory bulbs so I’m not sure if a particularly big pothole or other bump can potentially knock them loose. I will update if it does.

Nice bright white light, but triggers the "bulb out" error occasionally on the Audi A4 B8 (2011). I have no desire to put a huge heat-generating load resistor in parallel to the wiring, so I have no choice but to return them.

2018 Audi Q7 Premium Plus 2.0T. Replaced my OEM incandescent back-up bulbs for these LED's. These are as bright or brighter than stock with the correct color to match the other lighting. It amazes me that the whole car is LED except for the rear lower bumper lighting. These were plug and play with zero error codes. I have seen similar replacements that cost much more. The price was right and they seem to be great quality. Happy customer.

Bought these LED lights for my 2018 Subaru Forester Touring. We were dismayed to find the vehicle has a low resolution back facing camera that despite making software adjustments image was poor at night. Added to the problem was the factory backup light bulbs did not illuminate adequately at all. I am pleased that these replacement LED lights have improved both the camera image and distance of illumination at night. Well worth the cost and effort to install LED's.Note on the installation effort. The diameter of backup light socket for the Subaru was slightly smaller than the width of the LED bulb's plastic plug. But we were able to get the LED lights to work. It required gently (and I stress gently) using a fine metal file on the sides to slightly narrow the plastic plug a little at a time. In a few minutes we were able to push the plug all the way into the socket. Adding this note as an FYI since I realize this may only be a problem on the Subaru and not on other vehicle models or makes.

Wow, I can finally see to back up. The fit perfectly and are very bright. No flicker or any problems with the bulbs.