LEONLITE COB LED Security Light, Motion Sensor Flood Lights Outdoor, Aluminum, 3 Modes Motion Detector+Dusk to Dawn+Switch Control, 100-277V, Adjustable 2-Head, IP65, 5000K Daylight, ETL, White

Works perfectly, easy to install, quite bright with LED bulbs & easily adjusted for area coverage....Easily adjusted for functions, duration of illumination, etc. too.....

To be clear, Torchstar provided me with a Bronze 20W Dual-Head Motion Activated LED Outdoor Security Light at no cost for evaluation. If you've read my reviews, I call it as I see it...Windward Hawaii devours anything left outdoors with constant salty wind & rain. I have 6 motion-activated lights around the house. Poorly designed security lights reveal themselves quickly by triggering frequently for no apparent reason.Every motion-activated light will false-trigger. The good ones don't do it very often, the worst ones do it constantly from cheaply made sensors. In 10 days, the Torchstar light false-triggered 6 times that I know of (I don't stay-up all night to monitor it!). The false-triggers were caused by 4 torrential downpours & wind, and 2 unknowns. Unknowns are OK, if they don't happen often. It could be cats since there was no wind -- in which case it's not a false triggering. Torrential rains & wind can trigger any light I've ever installed. So far, this light offers above average sensor performance.To test sensitivity, I tried moving toward it from off to the side -- from out in the yard. Motion sensors are most sensitive at angles, and less sensitive from straight-on. After moving the sensor around to find the best position, (every situation is different), I walked towards it slowly. It came on at about 30 ft. at 45 & 60 degree angles. From straight-on, it activated at about 20 ft. I never came close to the advertised 70 ft. sensitivity, which is typical. I'm sure under ideal conditions, the distance would improve, but in the real world, cut any advertised figure in half. I have one expensive motion light in the front yard facing the street. It's sensor covers 270 degrees, and reaches 50+ ft., but it's made for commercial properties, and cost $150! Heavy rain & wind triggers it too.So far, the Torchstar light seems to be a good motion-activated, very bright LED light. It does everything expected of it -- well. The brightness of the lights is very impressive. Long periods of time in this environment will ultimately reveal if this light can withstand a tropical beating. So far, so good. I will update the review if anything changes... BTW, Costco sells a similar (but different) LED security light. They last about a year. I've had 5 fail -- avoid it.Pros* Blindingly bright, don't look at it! It lights-up my 1/3 acre open-space backyard well* Compact, this is not a big light. It's light-weight too, aiding installation* Rotating shades on each light are a nice touch* Easy light adjustment (which is not the case on some lights)* Very efficient* Cool to the touchCons* I noticed the white version has a 180 degree (half circle) sensor, the bronze 150. They're about the same price. The white model also moves the sensor farther out-front of the light, improving coverage. If you install a security light on the corner of your house, or along a wall, 180+ degree sensors are a must. Since I mounted the bronze version on a wall, it was possible to sneak-up very close to the light, but at 6 ft. it got me. 150 degree sensors have a more limited use. If the area you need covered is limited by trees, or is an alleyway or walkway, then 150 degree sensors are preferable. If mounted to cover wider areas, 150 degree lights can be thwarted by walking on the extreme sides.* Neutral colors better coordinate with a wider range of house color & surroundings. Bronze doesn't match much except a redwood tree or a log cabin! White or gray would be better, I might spray-paint mine ...

Old style design but Good quality, metal case. Wanted a soft white light which is rare to find nowadays. Works great.

Brighter than I expected, advertised as 2500 lumens, but compared to other lights I have, I think it puts out a little more.I was also concerned, based on the shape of the LEDs, the light would be mostly focused on two smaller areas. My pessimism was squashed, it distributes the light nicely over a broad area.My light is mounted 20’ above ground level, it lights an 180 degree arc and reaches out 50-60 feet before dimming. IMO, it’s not quite bright enough to grill, fix a car, or play lawn games. But it’s awesome as a motion activated security light.The sensitivity and time adjustments are on a turn knob, allowing complete customization instead of a slide switch with only low medium and high options.This is not a flush (flat) surface mount light; you will need a recessed electric box. My install area was a flush faceboard on the side of my house. I purchased an outdoor rated 5” electrical box, fortunately found a color match, problem solved.

This a a great replacement for a similar light that failed to come on with motion, this was a quality choice. Installation was a breeze and the fit was perfect to replace old fixture. The initial settings need to be done before you are satisfied and it’s a bit of a challenge with the very small manual that comes with the device but after setup I am very happy with the brightness and responsiveness to motion. Looks well made also!

Everything about it, excellent product is well built and works perfectly

This light does not work as advertised. And the company’s social media manager, who also does Leonlite’s product support, is slow and not at all helpful. First, even on the right settings, the light is on continuously day and night. Yes, It says it can recognize motion across a football field. In reality, it only picks up motion in my yard about 30 feet away from the light. I have tried repositioning it and that did not make a difference. In fact, my old motion detector, that I replaced with this light, was much, much better from a light and a detection perspective. I bought the 3CCT LED Security Light, Motion Sensor Flood Lights with 3 Modes Dusk to Dawn, Adjustable 2-Head.

High quality fixture, strong cast aluminum body, easy installation to replace existing motion detection light. My installation was to an existing recessed square metal junction box. I removed the cross bar that the original light was mounted to, and installed the new cross bar for the new fixture. The cross bar has a grounding screw to attach the green wire to. The new fixture, which includes a good gasket, mounted to the new cross bar very securely. All of the controls work as shown in the directions, with control of light intensity, range of motion detection, and length of "on" time. The fixture this replaced had two 100 watt halogen lights, this one has two 10 watt LED lamps, so the energy savings is substantial, and the field of good illumination is essentially the same. Given the life expectancy of LED lights, this should be a lifetime replacement. STRONG BUY recommendation!